Bộ thu và phát đôi kèm micro không dây cầm tay Shure BLX288A/PG58

Giá bán:
15,064,000 VNĐ
Mã sản phẩm:
BLX288A/PG58
Hãng sản xuất:
Shure
Bảo hành:
12 tháng
Xuất xứ:
China
Số lượng
  • Bộ thu và phát đôi kèm micro không dây cầm tay Shure BLX288A/PG58

    (02 Bộ phát  BLX2 / PG58 & bộ nhận dual BLX88)

    Shure BLX288A/PG58

    Tính năng của sản phẩm: Shure BLX288A/PG58

    The BLX288/PG58 system features Shure's dual-channel BLX88 receiver and a pair of BLX2 transmitters, each equipped with a Shure PG58 mic capsule.

    The transmitter features the popular PG58 mic capsule, a rugged and reliable ABS polymer chassis and frame, a 10 dB pad, an On/Off ergonomic push-button switch, and a single bi-color LED battery indicator. It has a rugged windscreen and has a comfortable size and shape.

    The receiver is a tabletop design with XLR and 1/4" outputs, and features one touch QuickScan technology, which examines the room and the available frequencies, and selects the best one.

    Bộ phát micro không dây cầm tay Shure BLX2/PG58

    Bộ phát micro không dây cầm tay Shure BLX2/PG58

    The Shure BLX2/PG58 Wireless Handheld Transmitter gives you easy setup and operation and true sound quality, courtesy of its integrated PG58 microphone capsule. The lightweight, tour-tough BLX2/PG58 sports Group and Channel selection buttons for quick, hassle-free frequency matching, while a 2-color LED keeps you status savvy. With up to 14 hours of operation on two AA batteries and transmission of up to 300', the BLX2/PG58 is up for any gig. Enjoy legendary Shure sound and performance, and take the stage confidently with the Shure BLX2/PG58

    Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

     

    Đặc tính nổi bật Shure BLX2/PG58

     

    • Up to 14 hours of continuous use (with 2 AA batteries)
    • Up to 300' transmission radius (line of sight)
    • Quick and easy frequency matching (Group and Channel selection buttons)
    • 2-color transmitter status indicator LED
    • Integrated PG58 microphone capsule
    • 10dB of gain attenuation
    • Lightweight, rugged construction
    • Color ID caps (available separately)
       

    thông số kĩ thuật shure BLX2/PG58

     

    Transmitter

    Audio Input Level 0 dB Gain: -20 dBV Maximum
    -10 dB Gain: -10 dBV Maximum
    Gain Adjustment Range 10 dB
    RF Output 10 mW, Typical (Varies by Region)
    Power Requirement 2x LR6 AA Batteries, 1.5 V Alkaline
    Housing Molded ABS  
    Dimensions (Ø x L) 2.1 x 8.8" (53 x 224 mm)
    Weight 7.7 oz (218 g)

    Microphone

    Type Dynamic (Moving Coil)
    Polar Pattern Cardioid
    Frequency Response 60 Hz to 15 kHz
    Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
    Sensitivity -53 dBV/Pa, (2.2 mV), 1 Pascal=94 dB SPL (@ 1 kHz)
    Electromagnetic Hum Sensitivity 26 dB equivalent SPL in a 1 millioersted field (60 Hz)
    Temperature Range -20 to 153°F (-29 to 57°C)
    Relative Humidity 0 to 95%

     

    Bộ thu 2 kênh Shure BLX88

     

     

    Shure BLX88

     

     

     

    The durable BLX88 offers simple setup, intuitive controls, and microprocessor-controlled internal antenna diversity.  One-touch QuickScan frequency selection quickly locates the best open frequency in case of interference. For use with BLX® Wireless Systems.

    Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

     

    Đặc điểm nổi bật Shure BLX88

     

    • XLR and ¼" output connectors
    • Microprocessor-controlled internal antenna diversity
    • Two-color audio status indicator LED
    • Green:  Normal audio levels
    • Red:  Excessive audio levels (overload / clipping)

     

    Thông số kĩ thuật Shure BLX88

     

    Output 2x XLR Output
    2x 1/4" (6.35 mm) Output
    Output Impedance XLR: 200 ohms
    1/4": 50 ohms
    Audio Output Level XLR Connector: -20.5 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone)
    1/4": -13 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone)
    RF Sensitivity -105 dBm for 12 dB SINAD, Typical
    Image Rejection >50 dB, Typical
    Housing Molded ABS
    Power Requirement 12 to 15 VDC @ 320 mA, Supplied by External Power Supply (Tip Positive)
    Dimensions (H x W x D) 1.5 x 15 x 4.5" (40 x 388 x 116 mm)
    Weight 15.1 oz (429 g)

     

Sản phẩm liên quan