Bộ phát cài lưng Shure GLXD1

Giá bán:
Liên hệ
Mã sản phẩm:
GLXD1
Hãng sản xuất:
Shure
Bảo hành:
12 tháng
Xuất xứ:
Shure
Số lượng
  • Bộ phát cài lưng Shure GLXD1

     

    Bộ phát cài lưng Shure GLXD1

    GLXD1 features an ergonomic design and reversible belt clip to fit comfortably and snugly in various positions. For use with GLX-D® Digital Wireless Systems, GLXD1 offers up to 16 hours of continuous use with Shure lithium-ion rechargeable batteries.

    Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.  

     

    Đặc điểm nổi bật của Shure GLXD1

     

    •     Automatically links with GLX-D wireless receivers
    •     Ergonomic design and reversible belt clip provide a comfortable fit
    •     Works with lavalier, headset, earset, and instrument mics; and guitar cables
    •     Continuous rechargeable use for up to 16 hours
    •     On/Off switch is easy to access
    •     Operates in the 2.4GHz frequency band
    •     Durable metal construction

     

    Thông số kĩ thuật Shure GLXD1

     

    Connector 1x Unbalanced 4-pin TA4M male mini-connector
    Tuning Frequency Range 2400 to 2483.5 MHz
    Range of Operation 200' (60 m) (typical, depends on RF signal absorption, reflection, and interference)
    Transmit Mode Frequency Hopping
    Frequency Response 20 Hz to 20 kHz
    Dynamic Range 120 dB, A-weighted
    RF Sensitivity -88 dBm, typical
    Total Harmonic Distortion 0.2%, typical
    RF Output 10 mW E.I.R.P, maximum
    Operating Temperature Range 0° to 135°F (-18° to 57°C)
    Storage Temperature Range -20° to 165°F (-29° to 74°C)
    Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output
    Battery Life Up to 16 hours
    Power Requirements 3.7 V Rechargeable Li-Ion
    Input Impedance 900 kΩ
    RF Output 10 mW E.I.R.P. maximum
    Maximum Input Level 1 kHz at 1% THD
    8.4 dBV (7.5 Vp-p)
    Antenna Internal Monopole
    Pin Configuration 1: ground (cable shield)
    2: +5 V bias
    3: Audio
    4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
    Housing Cast Metal
    Dimensions (H x W x D) 3.56 x 2.54 x 0.90" (90.4 x 64.5 x 22.9 mm), without antenna