Bàn trộn microphone 4 kênh Shure SCM268

Giá bán:
7,833,000 VNĐ
Mã sản phẩm:
SCM268
Hãng sản xuất:
Shure
Bảo hành:
12 tháng
Xuất xứ:
Mỹ
Số lượng
  • Shure SCM268 : Bàn trộn microphone 4 kênh

     

    Shure SCM268

    The Shure SCM268 4-Channel Microphone Mixer offers simplicity and routing flexibility in a convenient, compact, and rugged enclosure. The SCM268 features 4 high quality transformer-balanced XLR inputs and mic/line level switchable XLR output. Transformer balanced I/O provides maximum audio gain, minimizing hum and line noise. Two stereo paired (4 mono) RCA inputs except line level signal from consumer audio devices such as CD and cassette players, DVD players, VCR's etc.

    Also provided is an additional, independent AUX line level input with level control via a single RCA connector. Six sealed rotary pots provide level control for mic channels 1 through 4, AUX input channel and Master. The SCM268 also provides 12V phantom power for condenser microphones.

     

    Đặc tính nổi bật Shure SCM268

     

    • Four mic inputs with low-cut filters and 12V phantom power for condenser microphones
    • Five unbalanced RCA aux level inputs
    • One unbalanced RCA aux level output; LED peak output meter
    • Internal power supply (no wall wart!); IEC power cord connector included
    • Fits into a half-rack space and includes all the necessary rack mounting hardware

     

    Thông số kĩ thuật Shure SCM268

     

    Inputs 4 - Balanced XLR Microphone
    2 - Stereo (L/R) RCA line inputs
    Output 1 - Balanced XLR output (mic/line level)
    1 - AUX unbalanced RCA Phono
    Monitor/Headphone Out No - AUX output serves as secondary output and cab be used as a monitor source
    ALT I/O 2 - AUX RCA phono as described under outputs
    Link Input/Output No
    Impedance Input
    MIC (XLR): Designed for use with 19-600 ohm load, 1.2k ohms actual, -5dBV clipping level
    AUX: Designed for use with - / < 2k ohm load, 21k ohms actual, >28 dBV clipping level
    Outputs
    MIC: Designed for use with low-Z inputs, 0.2 ohms actual, -21 dBV clipping level
    LINE: Designed for use with > 600 ohms, 72 ohms actual, +18 dBV clipping level
    AUX: Designed for use with > 2k ohms, 870 ohms actual, +7dBV clipping level
    Gain Low-Impedance Mic Input (150 ohms): MIC 32dB, LINE 72dB, AUX 60dB - Outputs
    Line Input: MIC -9dB, LINE 31dB, AUX 19dB - Outputs
    Stereo Input: MIC -5dB, LINE 35dB, AUX 23dB - Outputs
    Hum & Noise Equivalent Input Hum and Noise: -124 dBV (150 ohm source; 22Hz to 22kHz)
    Output Hum and Noise: (22 Hz to 22kHz; channel controls full counterclockwise)
    Master full counterclockwise -92dBV
    Master full clockwise -70dBV
    Frequency Response (Ref 1kHz, channel and master controls centered)
    MIC/LINE Inputs: 150Hz to 20kHz + / - 2dB
    AUX Inputs: 20Hz to 20kHz + / -2dB
    Distortion <0.25% at +4 dBu output level, (through 22Hz -22kHz filter; MIC inout 1 and Master at center, all other controls full counterclockwise)
    Metering 6-segment LED meters
    Controls Sealed Rotary Potentiometers: MIC 1-2, STEREO 1-3 and MASTER gain controls. BASS and TREBLE control.
    DIP Switches
    Control Voltage Out No
    Phantom Power 12 Vdc open-circuit through 340 ohm series resistors
    Operating Temperature Operating: -7 to 49 degrees C (20 to 120 degrees F)
    Storage: -29 to 74 degrees C (-20 to 165 degrees F)
    Power SCM268: 100 - 120 Vac, 50/60 Hz, 60mA
    SCM268E: 220 - 240 Vac, 50/60 Hz, 30mA
    Dimensions 1.72 x 8.60 x 6.37 in. (43 x 218 x 162mm)
    Weight 2.62 lbs (1.20 kg)