Bộ thu và phát kèm micro không dây cầm tay Shure PGX24E/BETA58

Giá bán:
14,800,000 VNĐ
Mã sản phẩm:
Hãng sản xuất:
Bảo hành:
12 tháng
Xuất xứ:
Số lượng
  • Bộ thu và phát kèm micro không dây cầm tay Shure PGX24E/Beta58



    Shure PGX24E/Beta58


    This PGXD24/Beta 58 Digital Wireless System from Shure adds the clarity of 24- bit digital audio to the legacy of trusted Shure microphone options for wireless performance. It includes the Beta 58A, a precision-engineered supercardioid dynamic microphone optimized for lead vocal applications, PGXD4 wireless receiver, PGXD2 handheld transmitter, padded carrying case, and microphone clip.


    I/ Thanh phần thiết bị Shure PGX24E/Beta58


    - Shure PGXD4 Wireless Receiver

    - PGXD2/BETA58A Handheld Wireless Microphone Transmitter


    1 / Shure PGXD4 Wireless Receiver

    Bộ thu và phát kèm micro không dây cầm tay Shure PGXD24/BETA58A


    The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap.


    Đặc điểm nổi bật của Shure PGXD4


    • 24-bit / 48kHz digital technology for incredibly accurate sound
    • Automatic frequency selection locates a clear channel instantly
    • One-touch sync automatically syncs the transmitter and receiver
    • True digital diversity for rock-solid wireless signal reliability
    • Up to 5 compatible channels per frequency band
    • 1/4" and XLR audio outputs
    • Included padded carrying case for portability and protection

    Thông số kĩ thuật Shure PGXD4


    Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")
    Weight 289g (10.2oz.)
    Housing ABS
    Audio Output Level (ref. ±38kHz deviation, 1kHz tone) XLR connector (into 3000Î load): -2.5dBV 1/4" connector (into 10000Î load): +10 dBV
    Impedance: XLR: 50Î
    1/4": 50Î
    Sensitivity -102 dBm @ 10-5 BER
    Image rejection > 70dB, typical
    Impedance balanced Pin 1 Ground (cable shield)
    Power Requirements 12-18 Vdc at 150 mA, supplied by external power supply
    Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground
    Pin 2 Audio
    Pin 3 No Audio
    Audio LED Red: 2dB below clip
    Amber: 12dB below clip
    Green: 50dB below clip


    2/ Shure PGXD2/BETA58 Handheld Wireless Microphone Transmitter


    Bộ thu và phát kèm micro không dây cầm tay Shure PGXD24/BETA58A


    The PGXD2 transmitter features automatic setup, a multi-function LED Indicator (power, lockout, mute, low battery), and provides you with 8 hours of continuous use on 2 AA batteries. It gives you and your microphone a generous 200' (60m) operating range without losing audio quality.

    The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.

    The Beta 58A maintains a true supercardioid pattern throughout its frequency range. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.


    Đặc điểm nổi bật của  shure PGXD2/BETA58


    • Power, mute, and battery status LED
    • 10 dB of adjustable gain
    • Lockable interface prevents accidental setting changes
    • Rugged construction for reliable performance show after show


    Thông số kĩ thuật Shure PGXD2/BETA58


    PGX2 Handheld Transmitter


    Audio Input Level: +2 dBV maximum at -10dB position
    -8 dBV maximum at 0dB position
    Gain Adjustment Range 10dB
    RF Transmitter Output 30 mW maximum (dependent on applicable country regulations)
    Dimensions including SM58 cartridge 254mm x 51mm dia. (10" x 2")
    Weight 290g (10.2oz.) without batteries
    Housing Molded PC/ABS handle and battery cup
    Power Requirements 2 AA size alkaline or rechargeable batteries
    Battery Life > 8 hours (alkaline)


    Beta 58A Mic


    Type Dynamic (moving coil)
    Frequency Response 50 to 16,000Hz
    Polar Pattern Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
    Output Level (at 1,000Hz) Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV)
    *1 Pa = 94dB SPL
    Impedance Rated impedance is 150Î (290Î actual) for connection to microphone inputs rated low-Z phasing
    Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
    Case Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille Adjustable, Stand Adapter: Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/8"-27 thread, black finish
    Dimensions See user guide
    Net Weight 278g (9.92oz.)