Bộ micro không dây Shure SLX14E

Giá bán:
14,880,000 VNĐ
Mã sản phẩm:
Hãng sản xuất:
Bảo hành:
12 tháng
Xuất xứ:
Số lượng
  • Bộ micro không dây Shure SLX14E

    (Bao gồm: Bộ phát SLX1 & bộ nhận SLX4 )

    Tính năng của sản phẩm: Bộ micro không dây Shure SLX14E

    Sound installations and working bands need powerful wireless tools that can be set up quickly and used confidently. Shure's rugged SLX Wireless Systems exceed these demands with innovative automatic setup features, such as auto frequency scan and transmitter setup and exceptional wireless clarity. Supporting 20 compatible systems across multiple UHF frequency bands, SLX smoothly integrates into houses of worship, lecture halls, conference rooms, and mobile gear cases. SLX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless.

    Thông số kỹ thuật của sản phẩm: Bộ micro không dây Shure SLX14E

    • SLX4 Wireless Receiver:
    • Audio Output Level (ref. ± 38kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): —13dBV; 1/4" connector (into 3000 Ohm load): —2dBV
    • Output Impedance: XLR connector: 200 Ohms; 1/4" connector: 1kohms
    • XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
    • Sensitivity: —105 dBm for 12 dB SINAD, typical
    • Image Rejection: >70 dB, typical
    • Power Requirements: 12—18 Vdc at 150 mA, supplied by external power supply
    • Operating Range Under Typical Conditions: 300 ft. (100m)
    • Note: Actual range depends on RF signal absorption, reflection, and interference
    • Audio Frequency Response (+/— 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
    • Note: Overall system frequency depends on microphone element.
    • Total Harmonic Distortion (ref. +/— 38 kHz deviation, 1 kHz tone): 0.5%, typical
    • Dynamic Range: >100 dB A-weighted
    • Operating Temperature Range: —18 degree C (0 degree F) to +50 degree C (+122 degree F)
    • Note: battery characteristics may limit this range
    • Dimensions (H x W x D): 1.65 x 7.76 x 5.28 in., (42 x 197 x 134 mm)
    • Weight: 1 lb. 13 oz. (816 g )
    • Housing: Galvanized steel
    • Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with
    • respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
    • Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC
    • SLX1 Bodypack Transmitter
    • Audio Input Level: -10 dBV maximum at mic gain position, +10 dBV maximum at 0 dB gain position, +20 dBV maximum at -10 dB gain position
    • Gain Adjustment Range: 30dB
    • Input Impedance: 1 Mohms
    • RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations
    • Dimensions (H x W x D): 4.25 x 2.50 x 0.75 in. (108 x 64 x 19 mmD)
    • Weight: 81 grams (3 oz.) without batteries
    • Housing: Molded ABS case
    • Power Requirements: 2 "AA" size alkaline or rechargeable batteries
    • Battery Life: >8 hours (alkaline)


Sản phẩm liên quan