Multi-Purpose Microphone SM27-SC

Giá bán:
7,450,000 VNĐ
Mã sản phẩm:
Hãng sản xuất:
Bảo hành:
12 tháng
Xuất xứ:
Số lượng
  • Multi-Purpose Microphone Shure SM27-SC

    Features: Multi-Purpose Microphone Shure SM27-SC

    • Uniform cardioid pattern for superior off axis rejection
    • Superior transient response from a low-mass large Mylar® diaphragm
    • Flat, neutral frequency response for natural reproduction on stage or in the studio
    • 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
    • Durable metal construction.
    • Three separate mesh layers reduces wind and breath noise.
    • 15dB pad for performance consistency across a wider range of high SPL sources

    Specifications: Multi-Purpose Microphone Shure SM27-SC

    Type Condenser (externally biased)
    Frequency Response 20 to 20,000 Hz
    Polar Pattern Cardioid
    Impedance 150  (140  actual)
    (at 1 kHz, open circuit voltage)
    −37 dBV/Pa
    1 Pascal=94 dB SPL
    Maximum SPL
    (1 kHz at 1% THD)
    1000 Ω load: 133 dB (147 dB, Pad on)
    2500 Ω load: 138 dB (152 dB, Pad on)
    Signal-to-Noise Ratio
    (referenced at 94 dB SPL at 1 kHz)
    84.5 dB
    S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
    Dynamic Range
    (at 1 kHz)
    1000 Ω load: 123 dB
    2500 Ω load: 128 dB
    Common Mode Rejection
    (20 Hz to 20 kHz)
    > 50 dB
    Clipping Level
    (20Hz-20 kHz at 1% THD)
    1000 Ω load: 1 dBV
    2500 Ω load: 7 dBV
    THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL
    Self Noise
    (typical, equivalent SPL, A-weighted)
    9.5 dB
    Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
    Weight Net: 642 g (22.6 oz.)
    Switch Attenuator: -15 dB
    Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz
    Connector Three-pin professional audio (XLR), male
    Power Requirements 48 Vdc phantom, 5.4 mA