Micro dành cho ca hát Shure SM86

Giá bán:
4,495,000 VNĐ
Mã sản phẩm:
SM86
Hãng sản xuất:
Shure
Bảo hành:
12
Xuất xứ:
Mexico
Số lượng
  • Micro dành cho ca hát Shure SM86

    Micro dành cho ca hát Shure SM86

     

    The SM86 with the SLX2 transmitter features the SM86 cardioid condenser microphone head which is tailored for smooth, warm and rich vocal reproduction.

    The SLX2 Wireless Handheld Transmitter includes a timed backlit LCD display, frequency and power lockout, and "Mute" functionality. It works with the SLX4 receiver.

    This transmitter requires the SLX4 receiver to complete the system.

    All Shure wireless transmitter designs allow for interchangeable microphone heads.

    Micro dành cho ca hát Shure SM86
     

    Đặc tính sản phẩm Shure SM86

     

    • Condenser cartridge for studio quality sound
    • Tailored frequency response for a clear reproduction of vocals
    • Rugged construction withstands the rigors of touring sound
    • Cardioid polar pattern minimizes unwanted background noise
    • Excellent choice for stage monitors and personal monitors
    • Built-in three-point shock mount minimizes handling noise
    • Two-stage "pop" filter reduces wind and breath noise


    Thông số kĩ thuật Shure SM86

     

    Type Condenser
    Frequency Response 50 to 18,000 Hz
    Polar Pattern Cardioid
    Sensitivity (at 1,000 Hz) Open Circuit Voltage: -50 dBV/Pa (3.15 mV)
    (1 Pa = 94 dB SPL)
    Impedance 150 Ohms at 1 kHz
    Recommended minimum load impedance: 600 Ohms
    Output Clipping Level 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
    Maximum SPL (at 1,000 Hz) 1000 ohm load (1% THD): 147 dB
    Self-Noise 23 dB typical, A-weighted
    Dynamic Range (1000 ohms) 124 dB (maximum SPL to A-weighted noise level)
    Signal-to-Noise Ratio 71 dB at 94 dB SPL (IEC 651)*
    *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
    Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
    Power Requirements 11 to 52 Vdc, 5.2 mA
    Case Dark gray, enamel-painted, die-cast with a stainless steel grille
    Connector Three-pin professional audio connector (male XLR type)
    Net Weight 284 grams (10 oz)
    Dimensions 183 mm (6-3/16 in.) L x 49 mm (1-1/4 in.) W at the widest point