Frequency Response | 20 Hz to 20 kHz |
Dynamic Range | Analog-to-Dante: 113 dB (20 Hz to 29 kHz, A-weighted, typical) Dante-to-Analog: 110 dB (20 Hz to 29 kHz, A-weighted, typical) |
Output Noise | Line: −84.5 dBV (20 Hz to 29 kHz, A-weighted, typical) Aux: −95.2 dBV (20 Hz to 29 kHz, A-weighted, typical) Mic: −106.5 dBV (20 Hz to 29 kHz, A-weighted, typical) |
THD + N | < 0.05% (20 Hz to 20 kHz@ +4dBu analog input, -10 dBFS digital input) |
Polarity | Non-inverting, any input to any output |
Inputs | Configuration: Active balanced Aux: 10.8 dBV (minimum) |
Outputs | Configuration: Active balanced Impedance :310 Ω Clipping Level Line: 26.2 dBV Aux: 16.2 dBV Mic: −3.8 dBV Headphone Output :1/4" (6.3 mm) TRS, 100 mW, 350 Ω, dual mono (will drive stereo phones) |
DSP | AD/DA Conversion : 24-bit, 48 kHz Latency: Analog-to-Dante: 0.21 ms (Estimated Nominal, ±0.1 ms) Dante-to-Analog: 0.24 ms + TN (Estimated Nominal, ±0.1 ms) TN = Network latency in milliseconds, as set in Dante Controller Note: Dante network latency is typically associated with the receiving device |
Networking | Network Interface: Four-Port Gigabit Ethernet Switch, Dante digital audio Uplinks: Port: Selectable, blocks multicast traffic (Port 4) PoE : Provided on Port 1 to power MXWAPT Cable Requirements: Cat 5e or higher, shielded, 100 m maximum between network devices Network Addressing Capability DHCP, link-local, stat |
General | Power Requirements 100 to 240 V AC, 50-60 Hz, 1 A Housing ; Steel; Extruded aluminum Temperature Range : Operating: 0 to 145°F (-18 to 63°C) Storage: -20 to 165°F (-29 to 74°C) Dimensions: (H x W x D) 1.7 x 19.0 x 14.4" (44 x 483 x 366 mm) Weight : 6.9 lb (3.1 kg) |
Lợi ích khi mua ở TCA
Luôn có chính sách tốt nhất cho bạn
Tư vấn tậm tâm, nhiệt tình
Sản phẩm chính hãng
Đa dạng lựa chọn
Trải Nghiệm Thực Tế
Tại cửa hàng
Giao Hàng Miễn Phí
Bán kính 10km
Hỗ trợ SETUP Miễn Phí
Chuyên gia hàng đầu tại TCA